The M53015 Evaluation Board (EVB) is based on the V3 ColdeFire Core. This board is shipped with the MCF53015CMJ240J 256 pin map BGA populated to allow for the evaluation of the full functionality of this part.

This board was designed as a validation platform with maximum flexibility. Where possible we´ve also designed for power and speed but the primary goal of this system was flexibility.

Features:

M53015 External Interfaces:
• On-board speaker (can be connected to on-chip voice CODEC or external on-board audio CODEC)
• On-board microphone (can be connected to on-chip voice CODEC or external on-board audio
CODEC)
• Synchronous Serial Interface (SSI) connected to on-board audio CODEC
• USB Support
— On-chip dual role transceiver with device, and host, support (Mini-AB receptacle)
• Crystal/Clock
• BDM/JTAG
• Three UARTs; one selectable through Jumper setting
• FlexBus
• Timers
• External Interrupts
• University Breakout Connector for serial interfaces (I2C, QSPI, GPIO, etc.)
• SD card socket
• SIM card socket
• Dual Ethernet
• HDPH, SPKR, HDST, MIC jacks
Memory Subsystems:
• 8M x 16 NOR Flash
• 256K x 16 MRAM
• 2Kbit Serial EEPROM
• 32M x 16 Mobile DDR
Power:
• Inputs:
— 5 V Input to the voltage regulator circuitry
• Regulated On-board voltages:
— 3.3 V - I/O Voltage
— 1.8 V - Mobile DDR and Flash Voltage
— 1.2 V - MCF53015 Core Voltage