|
|
AVR® ONE!是一个功能强大的开发工具，用于所有AVR32器件的片上调试和编程。将来，AVR ONE!也将支持所有新的AVR 系列器件。
支持的调试接口有适用于高速跟踪的JTAG (IEEE 1149.1)、debugWire、PDI和Nexus【IEEE-ISTO 5001(TM)-2003】辅助接口。支持的编程接口有ISP、JTAG和PDI。适用于AVR32 Studio 2及更高版本的接口。 [更多]
|
|
|
|
Cyclone Pro提供BDM Multilink及USB/以太网接口的所有功能，可具有带按键和LED控制的独立编程器功能，支持所有MON08 HC08、BDM HCS08和HCS12系列单片机。 [更多]
|
|
| PICkit 2 Development Programmer/Debugger |
|
The PICkit™ 2 Development Programmer/Debugger (PG164120) is a low-cost development tool with an easy to use interface for programming and debugging Microchip’s Flash families of microcontrollers. The full featured Windows® programming interface supports baseline (PIC10F, PIC12F5xx, PIC16F5xx), midrange (PIC12F6xx, PIC16F), PIC18F, PIC24, dsPIC30, dsPIC33, and PIC32 families of 8-bit, 16-bit, and 32-bit microcontrollers, and many Microchip Serial EEPROM products. [更多]
|
|
|
|
PICkit 2 Debug Express allows in-circuit debugging on selected PICmicro microcontroller units (MCUs). In-circuit debugging allows the designer to run, examine, and modify the program while the PICmicro MCU is embedded in the hardware, thereby assisting the designer in debugging the firmware and hardware together. Debug Express interacts with MPLAB IDE software. Programs can be run, stopped, and single-stepped. One breakpoint can be set and the processor can be reset. Register contents can be examined and modified when the processor is stopped. Debug Express requires MPLAB IDE version 7.40 or later. [更多]
|
|
|
|
Microchip’s PICkit 3 In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer. [更多]
|
|
| ST7 inDART series in-circuit debuggers |
|
SofTec Microsystems provides low-cost tools with everything you need to get started developing applications for a range of ST7 microcontrollers, and with powerful capabilities to make debugging [更多]
|
|
| RealView ICE-ME in-circuit debugger programmer |
|
The RealView Developer Kit for ST is a complete development and debugging kit for designing applications for the STR7 and STR9 families of ARM core-based microcontrollers. The kit provides a [更多]
|
|
| MSP430 USB Debugging Interface |
|
The MSP-FET430U14 is a powerful flash emulation tool to quickly begin application development on the MSP430 MCU. It includes USB debugging interface used to program and debug the MSP430 in-system through the JTAG interface or the pin saving Spy Bi-Wire (2-wire JTAG) protocol. The flash memory can be erased and programmed in seconds with only a few keystrokes, and since the MSP430 flash is ultra-low power, no external power supply is required. [更多]
|
|
|
