AVRUSBRF01 is based on Atmel AT90USB162 microcontroller, which allows connection to PC through USB, and nRF24L01 transceiver from Nordic VLSI. [更多]
LF RFID Application Kit ATA2270-EK1
This LF demonstration kit provides a completely self-contained means to begin using RFID systems, even for users with very little prior RFID experience. [更多]
ATAVRBC100 AVR Reference Design for Battery Pack
A reference design that demonstrates charging and discharging of two batteries/battery packs with a programmable charge voltage up to 40V. [更多]
CY3271 FirstTouch Starter Kit
This intuitive starter kit allows you to evaluate the PSoC programmable system-on-chip and CyFi Low-Power RF in CapSense touch-sensing,temperature sensing, and light-sensing applications. [更多]
eReader Reference Design based on i.MX51
Freescale has developed an eReader reference development system as thenext installment in the Freescale Smart Application Blueprint for RapidEngineering (SABRE) series of platforms. By enabling a Soft EPDController to drive the E Ink panel, there is no need for costlyexternal controllers and associated memories. [更多]
Next-generation residential gateway products will be challenged to maintain bridging/routing throughput speeds as WAN interfaces (GPON, VDSL2) distribute more packets per second. The products that survive will deliver this level of performance and the flexibility to support multiple LAN interfaces (802.11n, HPNA 3.1, MoCa, HomePlug AV UPA). In addition to performance, these products must also bring the right balance of consumer required features and ease of use, while supplying the service providers with a cost-effective platform that enables future services via remotely managed upgrades. [更多]
Smartbook Reference Design
Freescale has developed a smartbook tablet reference design, the firstin the Freescale Smart Application Blueprint for Rapid Engineering(SABRE) series of platforms. The SABRE platform for smartbooks provides apersonal, portable Internet and entertainment experience whilecombining some of the best attributes of smartphones and netbooks. [更多]
The Silicon Labs CAN OBD Reader Reference Design use the CAN peripheral of the C8051F502 microcontroller (MCU) and interfaces to the OBD-II port in a vehicle to retrieve the diagnostic error codes and status information. [更多]
Wireless Sensor Node Energy Harvesting Reference Design
The Wireless Sensor Node Energy Harvesting Reference Design illustrates how to use an Si1xxx wireless microcontroller in an extremely low power wireless sensor application. [更多]
RF to USB Reference Design
The RF to USB Reference Design is a simple tool to demonstrate, evaluate and develop with Silicon Labs' low power sub-GHz wireless MCUs. [更多]
DTMF Decoder Reference Design
Using the 25 MIPS CPU and on-chip ADC, the C8051F300 can perform DTMF tone generation and decoding. The combination of high performance and small size (3x3 mm) makes the C8051F300 an ideal choice for applications requiring DTMF decoding or other CPU intensive tasks. [更多]
Embedded Ethernet Development Kit
The Embedded Ethernet Development Kit provides all of the hardware and software necessary to develop real-world embedded Ethernet applications using Silicon Laboratories´ CP220x Ethernet Controller and high-performance microcontrollers, and the industry-proven CMX-MicroNet protocol stack. [更多]
Embedded Modem Development Kit
The Embedded Modem Development Kit provides all of the hardware and software to create an embedded modem solution. [更多]
PoE with Voice Transmission Reference Design
The reference design kit includes a PoE-VOICE-EB reference design board which contains an IEEE 802.3af compliant Power over Ethernet (PoE) circuit, 8 kHz voice/speech sampling system and an IEEE 802.3 embedded Ethernet connection. [更多]
Sensorless BLDC Motor Reference Design
The Sensorless BLDC Motor Reference Design illustrates how to use the 5x5 mm C8051F310 microcontroller for high performance sensorless BLDC motor applications. [更多]
Stepper Motor Reference Design
The Stepper Motor Reference Design illustrates how to use the 3x3 mm C8051F301 microcontroller for high performance stepper motor applications. This reference design can also be used as a platform for stepper motor code development. The firmware (AN155SW) demonstrates a linear-velocity profiler with adjustable acceleration. [更多]
Temperature Compensated RTC Reference Design
The Temperature Compensated Real-Time Clock (RTC) Reference Design kit provides a cost-effective way to easily develop applications that use a temperature compensated RTC. [更多]
USB Mass Storage Reference Design
The USB Mass Storage and CF/MMC/SD Reference Design kit includes everything necessary to implement a FAT16 file system using an SD, MMC or CF memory card on your Silicon Labs MCU. In addition, it provides a method of interfacing that system to a host PC via USB using the Mass Storage Device class. [更多]
Voice Recorder Reference Design
The Voice Recorder Reference Design illustrates how to use a C8051F411 for voice application. It is a practical demonstration of C8051F41x high performance analog and CPU throughput capability. [更多]
Stepper Motor and DC motor drive using L6206 DIP
The EVAL6206N will help you in evaluating the L6206 in PowerDIP package. It implements a typical application, enabled to run one to four DC motors or one stepper motor. On the board the L6506, PWM [更多]
STM32 Motor control starter kit
The STM32 microcontrollers with dedicated motor control peripherals and powerful Cortex™-M3 core offer the computing power developers need for 3-phase brushless motor vector control. [更多]
TMS320F28335 eZdsp Starter Kit
The F28335 eZdsp starter kit is a complete software development platform for theTMS320F2833x series of floating-point Digital Signal Controllers. [更多]
The Stellaris® Serial-to-Ethernet Reference Design Kit (RDK-S2E) offers a complete, open-tool, and ready-to-implement solution designed to add web connectivity to any serial device. Included in the RDK-S2E is the tiny-footprint Stellaris® Serial-to-Ethernet Module (MDL-S2E). [更多]
DM365 DVR Reference Design
Single platform solution based on the DM365 provides H.264 in HD [更多]
TMS320DM368 IP Camera
Single platform solution provides 1080p @ 30 frames per second [更多]
Stellaris® Stepper Motor Reference Design Kit
The Stellaris Stepper Motor Control Reference Design Kit (Stepper RDK) contains all the necessary hardware and software for you to design, develop, and integrate your stepper motor applications. [更多]
Stellaris® AC Induction Motor Reference Design Kit
The Stellaris AC Induction Motor Reference Design Kit (ACIM RDK) contains all the necessary hardware and software to design, develop, and integrate AC induction motor applications. The ACIM RDK [更多]
Stellaris® Brushless DC (BLDC) Motor Reference Design Kit
The Stellaris Brushless DC (BLDC) Motor Control Reference Design Kit (RDK-BLDC) with Ethernet and CAN contains all the necessary hardware and software for you to design, develop, and integrate your BLDC motor applications. [更多]
Stellaris® Intelligent Display Module (IDM) with Ethernet
The compact Stellaris® Intelligent Display Module (MDL-IDM) offers a complete graphical touch-screen user interface solution for control, automation, and instrumentation applications. Featuring Power-over-Ethernet (PoE), the Stellaris® IDM offers a simple method to produce intelligent terminals that can be simultaneously powered and network-connected by a single CAT5 Ethernet cable. [更多]
eZ430-Chronos Wireless Watch Development Tool
The eZ430-Chronos is a highly integrated, wearable wireless development system based for the CC430 in a sports watch. [更多]
Stellaris® Brushed DC Motor Control Module with CAN Reference Design Kit
The Stellaris® Brushed DC Motor Control Module with CAN (RDK-BDC24) provides variable speed control for both 12 V and 24 V brushed DC motors at up to 40 A continuous current, and includes a new RS232-based serial control input that also functions as a serial-to-CAN bridge. The MDL-BDC24 includes a rich set of sensor interfaces, connectivity, and control options [更多]
支持 CAN 的 Stellaris® 有刷直流 24 V 电机控制模块
MDL-BDC24 "Black Jaguar" 可作为 Texas Instruments´ MDL-BDC，即 FIRST Robotics Competition (FRC) Kit of Parts 的支持 CAN 的官方速度控制器的直接替代方案 [更多]
Stellaris® 有刷直流 (BDC) 12V 电机模块
支持 CAN 的 Luminary Micro’s Stellaris 有刷直流电机控制模块 (MDL-BDC) 可为 12 V 有刷直流电机提供最高 40 A 持续电流的变速控制。 [更多]
Stellaris® Brushless DC (BLDC) Motor Control Board with Ethernet and CAN
The brushless DC (BLDC) motor control board is a four-quadrant motor control board for three-phase BLDC motors rated at up to 36 V. [更多]
Stellaris® Ethernet-enabled Intelligent Display Module with PoE
The compact Stellaris® Intelligent Display Module (MDL-IDM) offers a complete graphical touch-screen user interface solution for control, automation, and instrumentation applications. Featuring Power-over-Ethernet (PoE), the Stellaris IDM offers a simple method to produce intelligent terminals that can be simultaneously powered and network-connected by a single CAT5 Ethernet cable. [更多]
Stellaris® PoE Intelligent Display
Featuring a 2.8" QVGA 16-bit color LCD resistive touch panel display , thecompact Stellaris® MDL-IDM28 Intelligent Display Module offers a completegraphical Human Machine Interface (HMI) control panel in control, automation,and instrumentation applications. [更多]
Stellaris® Intelligent Display Module with 3.5
The Stellaris® 3.5-inch Landscape Intelligent Display Module (MDL-IDM-L35)offers a complete, open-tool graphical touch-screen user interface design solution for control, automation, and instrumentation applications. [更多]
