|
|
The Qseven® compliant module Qseven-i.MX537 is based on Freescale’s next generation, high-performance, power-efficient, consumer multimedia applications processor i.MX537. The Qseven® module is available for the industrial temperature range (-40 to +85°C). It addresses 1GByte DDR2-SDRAM, has an on-board NAND-flash of 2GByte and an additional SPI NOR-flash of 4MByte. Various interfaces are enabled by its on-board extension connectors.
Qseven complainant board
- ARM® Cortex™-A8 up to 800MHz
- 1 GByte DDR2-SDRAM
- 2 GByte NAND Flash,4 MByte NOR Flash
- Ethernet physical (10/100 Mbit) on-board
- Industrial Core Module (-40 to +85°C)
- Dimensions 70x70mm
- Image-Sensor-Modules Connector
- µSD-Card slot on-board
[更多]
|
|
| CY8CKIT-008 PSoC® CY8C29 Family Processor Module Kit |
|
The PSoC® CY8C29 Family Processor Module is designed to evaluate andexperiment with Cypress’s PSoC 1 programmable system-on-chip designmethodology and architecture. This processor module can be used inconjunction with the PSoC Development Kit (CY8CKIT-001) to createdesigns utilizing on-board DVK resources or compatible expansion boards.This kit provides you with an additional processor module to use withdifferent projects. [更多]
|
|
| CY3280-SLM Linear Slider Module Kit |
|
The CY3280-SLM Linear Slider Module consists of five CapSense buttons,one linear slider (with ten sensors) and five LEDs. This module connectsto any CY3280 Universal CapSense Controller Board, such as the latest CY3280-20x66 DVK. [更多]
|
|
| CY3280-BSM Simple Button Module Kit |
|
The CY3280-BSM Simple Button Module consists of ten CapSense buttons andten LEDs. This module connects to any CY3280 Universal CapSenseController Board, such as the latest CY3280-20x66 DVK. [更多]
|
|
| CY3280-BMM Matrix Button Module Kit |
|
The CY3280-BMM Matrix Button Module consists of eight LEDs as well aseight CapSense sensors organized in a 4x4 matrix format to form 16physical buttons. This module connects to any CY3280 Universal CapSenseController Board, such as the latest CY3280-20x66 DVK. [更多]
|
|
| CY3280-BBM Universal CapSense Prototyping Module Kit |
|
The CY3280-BBM Universal CapSense Prototyping Module provides access toevery signal routed to the 44-pin connector on the attached controllerboard(s). Use the Prototyping Module board in conjunction with aUniversal CapSense Controller board (either the stand-alone CY3280-24x94Controller Board or the CY3280-20x34 and CY3280-21x34 Controller Boardscontained within the CY3280-BK1 Kit) to implement additionalfunctionality that is not part of the other single-purpose UniversalCapSense Module boards [更多]
|
|
| MC9S08PT60 Rugged 5V 8-Bit Module |
|
The new rugged 5V MC9S08PT60 development board, combines exceptional EMC/ESD performance with integrated touch sensing and EEPROM. [更多]
|
|
| ToolStick Daughter card for C8051F300/301/302/303/304/305 |
|
The target MCU and application circuitry are located on the Daughter Card; the IDE interfaces with this MCU. The Daughter Card plugs into the Base Adapter. [更多]
|
|
| Raisonance Daughter Card for STM3210B-SK/RAIS |
|
Raisonance daughter card upgrades STM3210B-SK/RAIS (Raisonance REva Starter Kit for STM32) to Performance Line. [更多]
|
|
| Stellaris® Stepper Motor Module |
|
The Stellaris® Stepper Motor Control Module (MDL-STEPPER) is a rapid-time-to-market module solution that offers OEMs the capability of quickly adding stepper motion control capability to any application. [更多]
|
|
| Stellaris® Serial-to-Ethernet Module |
|
The tiny-footprint Stellaris® Serial-to-Ethernet Module (MDL-S2E) offers a complete, ready-to-implement solution designed to add web connectivity to any serial device. [更多]
|
|
| Supplemental DB48 daughterboard for the LM3S301 microcontroller |
|
If you have already purchased the Stellaris FamilyDevelopment Kit packaged with a specific daughterboard, you can workwith our full line of microcontrollers by ordering additionaldaughterboards to use with the same kit. Development Kit required [更多]
|
|
| Supplemental DB48 daughterboard for the LM3S328, LM3S628, and LM3S828 microcontrollers |
|
|
If you have already purchased the Stellaris FamilyDevelopment Kit packaged with a specific daughterboard, you can workwith our full line of microcontrollers by ordering additionaldaughterboards to use with the same kit. Development Kit required. [更多]
|
|
| Supplemental DB48 daughterboard for the LM3S317, LM3S617, and LM3S817 microcontrollers |
|
|
If you have already purchased the Stellaris FamilyDevelopment Kit packaged with a specific daughterboard, you can workwith our full line of microcontrollers by ordering additionaldaughterboards to use with the same kit. Development Kit required. [更多]
|
|
| Supplemental DB48 daughterboard for the LM3S618, and LM3S818 microcontrollers |
|
|
If you have already purchased the Stellaris FamilyDevelopment Kit packaged with a specific daughterboard, you can workwith our full line of microcontrollers by ordering additionaldaughterboards to use with the same kit. Development Kit required. [更多]
|
|
|
|
The latest development in C2000 MCU development tools! Starting at $49 controlCARDs feature a C2000 microcontroller and all necessary support devices on one daughter card. Supplying the controlCARD with a single 5 volt supply makes it fully functional. The daughter-card plugs into a simple motherboard connector that gives access to all peripherals on the device and provides an isolated UART for communication. [更多]
|
|
|
|
The latest development in C2000 MCU development tools! Starting at $49 controlCARDs feature a C2000 microcontroller and all necessary support devices on one daughter card. Supplying the controlCARD with a single 5 volt supply makes it fully functional. [更多]
|
|
|
|
The latest development in C2000 MCU development tools! Starting at $49 controlCARDs feature a C2000 microcontroller and all necessary support devices on one daughter card. Supplying the controlCARD with a single 5 volt supply makes it fully functional. [更多]
|
|
| MSP430 Wireless Development Tool Target Board |
|
The eZ430-RF2500T is an additional wireless target board for the eZ430-RF2500wireless development tool. [更多]
|
|
| Stellaris AC Induction Motor Module |
|
The Stellaris® Stepper Motor Control Module (MDL-STEPPER) is arapid-time-to-market module solution that offers OEMs the capability of quickly adding stepper motion control capability to any application. [更多]
|
|
|
