The Atmel AVR STK500 is a starter kit and development system for Atmels AVR Flash microcontrollers. The STK500 gives designers a quick start to develop code on the AVR combined with features for using the starter kit to develop prototypes and test new designs. The STK500 interfaces with AVR Studio, Atmels Integrated Development Environment for code writing and debugging. Expansion cards are available for different AVR sub-families and larger devices. [更多]
AVR® STK600 Starter Kit
The Atmel AVR® STK600 is a complete starter kit and development system for the AVR and AVR32 flash microcontrollers from ATMEL Corporation. It is designed to give designers a quick start to develop code on the AVR, combined with advanced features for using the starter kit to prototype and test new designs. STK600 is shipped with a ATmega2560 device board. [更多]
The AVR RZUSBSTICK consists of one USB stick with a 2.4 GHz transceiver and USB connection to your PC. The AT86RF230 transceivers high sensitivity gives the longest range for wireless products while the AT90USB1287 incorporates fast USB On-The-Go. [更多]
ATAVRMC301 Motor Control Processor Board for ATtiny861
This device board for Atmel ATTiny861 AVR microcontroller drives brushless DC, brushed DC and stepper motors when connected to the power stage board ATAVRMC300 ( purchased separately). [更多]
New Integrated Development Environment (IDE) for developing and debugging embedded AVR applications. AVR Studio 5 is the new Integrated Development Environment (IDE) for developing and debugging embedded AVR applications. The AVR Studio 5 editor simplifies code editing and lets you write code more efficiently. It supports all 8- and 32-bit AVR microcontrollers, and connects seamlessly to Atmel AVR debuggers and development kits. AVR Studio 5 beta is made available for users who want to help us test the new version. Users are warned against using the beta release for their mission critical projects. [更多]
embOS is a real time operating system for embedded applications designed to offer the benefits of a fully featured multitasking system, even for hard real time applications using minimal resources. [更多]
ATAVRBC100 AVR Reference Design for Battery Pack
A reference design that demonstrates charging and discharging of two batteries/battery packs with a programmable charge voltage up to 40V. [更多]
AVRISP mkII In-System Programmer
AVR In-System Programmer mkII is used for field upgrades of AVR Flash microcontrollers. The AVRISP mkII combined with AVR Studio can program new AVR 8-bit RISC microcontrollers with ISP Interface. [更多]
AT18F-DK3
The AT18F-DK3 Configurator Programming Kit is a JTAG In-System Programming (ISP) tool to program the Atmel AT18F series FPGA configuration memories (Configurators). [更多]
